Royal Mail Prohibited and Restricted Items: A Sender’s Packing and Declaration Checklist
prohibited itemsrestricted goodspostal regulationspacking checklistshipping compliance

Royal Mail Prohibited and Restricted Items: A Sender’s Packing and Declaration Checklist

RRoyal Mail Editorial Team
2026-11-15
6 min read

Use this practical Royal Mail prohibited and restricted items checklist to check batteries, liquids, aerosols, medicines, food and declarations before posting.

Knowing what you can send by Royal Mail before you pack prevents delays, refusals, damage and possible compliance problems. This practical checklist separates goods that are generally unsuitable for post from items that may be accepted only under specific packaging, quantity, service or destination rules.

Overview

Royal Mail prohibited items are goods that should not be posted through the service. Restricted items may be accepted, but only when the relevant conditions are met. Those conditions can depend on whether the item is sent within the UK or abroad, the service selected, the item’s quantity and concentration, its packaging, and the rules of the destination country.

This means a previous successful posting is not proof that an item is permitted today or on a different service. Before sending anything unusual, check Royal Mail’s current prohibited and restricted items guidance, along with the destination country’s import rules where relevant. If the guidance is unclear, ask Royal Mail or a suitably qualified shipping adviser before handing over the parcel.

Use this article as a preparation and declaration checklist, not as a substitute for the current carrier rules. For overseas parcels, also review our Royal Mail customs and international packing guide.

Checklist by scenario

The table below is a starting point for identifying goods that need extra attention. “Check first” means the item may be conditionally accepted in some circumstances, but you should verify the current rules before packaging it.

Item categoryPractical classificationWhat to check before posting
Explosives, fireworks and ammunitionGenerally prohibitedDo not place these in an ordinary postal parcel. Use an authorised specialist route only where legally available.
Flammable liquids, fuels and some chemicalsGenerally prohibited or highly restrictedCheck the product’s safety information, classification and carrier rules. Never rely on an ordinary retail label alone.
Aerosols and pressurised containersCheck firstIdentify the contents, size, pressure and intended destination. Some products may be excluded even when unopened.
Batteries and devices containing batteriesCheck firstConfirm the battery type, whether it is installed in equipment, whether it is damaged or recalled, and whether the chosen service accepts it. Protect terminals and prevent movement.
Liquids, pastes and gelsCheck firstUse leak-resistant inner packaging, absorbent material where appropriate and a strong outer box. Confirm whether the contents are flammable, corrosive, medicinal or otherwise regulated.
Medicines and medical productsCheck firstConsider prescription status, temperature requirements, controlled-drug rules, packaging and the destination country’s import restrictions. A prescription does not automatically make an item postable.
Food and perishable goodsCheck firstConfirm shelf life, leakage risk, temperature needs, packaging and international import rules. Avoid posting goods that could spoil or contaminate other mail.
Sharp objects, blades and toolsCheck firstSecure every edge and point so it cannot move through the packaging. Verify whether the object is lawful to possess and whether the service permits it.
Valuables, cash, jewellery and important documentsService and compensation checkReview exclusions, compensation limits, proof-of-value requirements and available tracking. Some valuable items may not be covered even if physically accepted.
ElectronicsPackaging and battery checkSwitch devices off, protect screens and controls, prevent movement and check any lithium or other battery restrictions. Do not send damaged, swollen or leaking batteries.

For bulky, fragile or high-value goods, ordinary parcel posting may not be the best option. Compare the packaging, insurance and claims considerations in our high-value and bulky freight checklist.

What to double-check before posting

  1. Identify the contents precisely. Write down the product name, form, quantity, concentration where relevant, and whether it contains a battery, liquid, gas or chemical. “Household item” is not a sufficient description for a regulated product.
  2. Check the route. Separate UK requirements from international requirements. A destination country may prohibit an item that is acceptable domestically, or require additional declarations, permits or packaging.
  3. Choose the service only after checking eligibility. A faster or tracked service is not automatically suitable for restricted goods. Confirm that the service accepts the item and that tracking or compensation terms apply to it.
  4. Use protective packaging. Seal liquids separately, cushion fragile contents, immobilise heavy objects and protect sharp edges. The parcel should withstand normal handling without opening, leaking or exposing its contents.
  5. Complete declarations accurately. For international mail, describe the actual contents rather than using vague wording such as “gift” or “samples”. State quantity and value honestly and retain a copy or photograph of the completed information.
  6. Check compensation and evidence. Keep receipts, product descriptions, photographs of the packed parcel and proof of value. Acceptance by a counter does not necessarily mean an excluded item will be covered for loss or damage.
  7. Confirm the final label. Make sure the address, return address, service label and any required handling marks are visible and consistent with the declaration. For parcel size and service planning, see our parcel sizes and prices guide.

Common mistakes

  • Assuming “small quantity” means permitted. Quantity limits and conditions vary by product and route. Check the current rule instead of estimating.
  • Hiding a restricted item inside another product. Concealing contents creates a safety and declaration problem and can lead to refusal or disposal.
  • Using weak or reused packaging. Old boxes may have lost strength, and oversized packaging can allow contents to move. Match the box to the item and seal all openings securely.
  • Posting damaged batteries or leaking products. Stop and isolate the item safely. Do not place it in the postal network while it is swollen, cracked, wet, hot or otherwise compromised.
  • Treating a customs form as a formality. An inaccurate description or value can cause delays, returns, charges or enforcement action in the destination country.
  • Confusing acceptance with insurance. A carrier may accept a parcel while limiting compensation for its contents. Read the exclusions before choosing a service.
  • Ignoring seasonal and operational changes. Temporary restrictions, severe weather, peak-period controls or service changes can affect what is accepted and how it must be packed.

If a parcel is refused, do not simply relabel it and try again. Ask why it was refused, check the current rule for the exact item and service, and decide whether it should be repacked, returned, disposed of through an approved route or sent by a specialist carrier.

When to revisit this checklist

Recheck the current prohibited and restricted items guidance every time you send an unusual, regulated or high-value item. It is especially important to review it when sending internationally, changing service, posting batteries or aerosols, shipping medicines or food, or using a new type of packaging.

Businesses should schedule a monthly review of their packing and declaration process, with an immediate check after a carrier policy change, regulatory update, product recall or significant seasonal posting period. Keep the date of the last review on the business checklist so staff can distinguish current guidance from an old printed copy.

Before handing over the parcel, complete this final five-point check:

  1. Have I identified every item and checked whether it is prohibited or restricted?
  2. Have I checked the route, destination and selected service?
  3. Is the packaging strong, sealed, secure and suitable for the contents?
  4. Are the label and any customs declaration accurate?
  5. Have I confirmed compensation, retained evidence and checked for current changes?

If any answer is uncertain, pause the shipment and verify the current Royal Mail guidance before posting. This short delay is usually preferable to a refused parcel, a damaged consignment or an uninsured loss.

Related Topics

#prohibited items#restricted goods#postal regulations#packing checklist#shipping compliance
R

Royal Mail Editorial Team

Shipping and Compliance Editor

Senior editor and content strategist. Writing about technology, design, and the future of digital media. Follow along for deep dives into the industry's moving parts.